MultiLiner^® is the strongest CIPP product on the market!!!!
- And even price competitive in comparison with most felt products...

One of the many benefits of the MultiLiner^® include pre-impregnation. The MultiLiner^® is delivered in a box, impregnated and ready to install. You can keep the liner on shelf up to 4 weeks or more when stored below 65ºF / 18ºC.

You take the MultiLiner^® to the job site and winch it in directly from the transportation box.

 
DN 16"/400 mm MultiLiner^® ready to pull in directly from the box.

Having 4 weeks after impregnation to install the MultiLiner^® sure makes your relining schedule a lot more flexible. And you don't have to bother with the impregnation yourself!!!!

Here are more of the many MultiLiner^® benefits:

• Seamless fiberglass liner. ASTM approved (new standard F 2019) and US patented!

In all liners the seam has always been the weakest point ...
... the MultiLiner^® has NO WEAK POINTS!

 
A multiple number of fiberglass layers determine the wall thickness.

• The strongest CIPP liner on the market. Up to 5 times stronger than any other felt liner! This has a serious impact on the material thickness and the cost of the liner:

A typical DIA 12" / DIA 300mm MultiLiner^® is only 3.0 mm thick

A typical DN 18" / DN 450mm MultiLiner^® is only 5.0 mm thick

A typical DN 24" / DN 600mm MultiLiner^® is only 7.0 mm thick

A typical DN 40" / DN 1.000mm MultiLiner^® is only 10.0 mm thick

 

• Available in DN 6" - 48" / 150 - 1200 mm

• Fast curing time and small set-up. Makes it possible to do 2 or more installations per day!

A 12" MultiLiner^® is cured in 3 1/2 - 4 hours.

A 40" MultiLiner^® is cured in approx. 6 hours.

(This may increase, depending on depth, hydraulic pressure, etc.)

 
Installing the MultiLiner^® requires no inversion towers and large trucks.
The equipment is fast and easily set up anywhere, anytime. 

 

• The tightest fit. Due to the extremely high curing temperature achieved by steam, the curing process is very fast. The shrinkage after curing is very close to non-existing, normally less than 1%. In comparison a typical felt liner has up to 3% shrinkage. 

• Low start-up cost! Rental equipment available.